Customization: | Available |
---|---|
After-sales Service: | Yes |
Warranty: | Yes |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Grade
|
Carbon/Galvanized | Stainless | Aluminium |
Q235,SS400,St37,St52,ASTMA36,A283GRC,S235JR... | 201,202,301,302,304,304L,310S, 310, 309, 309S, 316, 316L, 316Ti,403, 405, 409, 409L, 410, 410S, 420, 430....... | 1050,1060,1100,2024,2204,3003, 5052, 5754...... | |
Thickness | 1-10mm(2-8mm usually used) | ||
Width | 1000-2000mm (1250 and 1500mm usually used) | ||
Length | 1000-12000mm or as your request | ||
Surface | Carbon,Galvanized,Stainless,Aluminium | ||
Pattern | Diamond,Round Bean,Hyacinth Bean,5 Bar...... |
Chemical Composition | ||||||||||
No. | Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | AL |
1 | 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 99.5 |
2 | 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 99.6 |
3 | 1100 | Si+Fe: 0.95 | 0.1 | 0.05 | - | - | 0.1 | - | 99.0 | |
4 | 3003 | 0.6 | 0.7 | 0.1 | 1.0-1.5 | - | - | 0.1 | - | Margin |
5 | 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | 0.25 | - | Margin |
6 | 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | 0.4 | 0.1 | Margin |
7 | 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | 0.25 | - | Margin |
8 | 5050 | 0.4 | 0.7 | 0.2 | 0.1 | 1.1-1.8 | 0.1 | 0.25 | - | Margin |
9 | 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.2 | 0.1 | - | Margin |
10 | 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | 0.15 | Margin |
11 | 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.1 | 0.25 | 0.15 | Margin |
12 | 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | Margin |
13 | 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | Margin |
14 | 8011 | 0.5-0.9 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | Margin |